The 8610C GC shown above is equipped
with NPD, FID, and PID detectors. Amplifier and gain controls
are conveniently located immediately adjacent to each detector.
Fourteen detector combinations are available for
mounting on the SRI Models 8610C and 310 GC mainframes. You
can also upgrade your current GC or add more analytical power
to your lab with these detectors as Stand-Alone units on the Model 110 detector chassis.
Up to four detectors may be mounted along the
right hand side of the GC's column oven and used
simultaneously (although some rare combinations
of detectors may conflict because of space
limitations). Each detector is equipped with a
thermostatted heater block for temperature
stability, electronic pressure controlled ( EPC )
support gases, such as hydrogen and air for the
FID, and internal amplifier electronics. Select
your detector type(s) based on your particular
measurement application, detection limit
required, matrix interferences, and/or regulatory
guidelines.
