SRI PRECONFIG CRYO-SULFUR

		Tel............................203.393.3112
QUADREX CORPORATION		Toll-Free................... 800.275.7033
P.O. Box 3881		Fax.......................... 203.393.0391
Woodbridge, CT 06525 U.S.A.		E-Mail..........sales@quadrexcorp.com

SRI PRECONFIGURED GC SYSTEMS - CRYO-SULFUR GC

SRI CRYO-SULFUR GC

	FPD/FID combined detectors
	Built-in air compressor
	10-port gas sampling valve and valve oven
	Cryo-cooled Peltier Trap
	Vacuum pump and interface
	4-channel Peaksimple data system
	60 meter capillary column

The SRI Cryo-Sulfur GC comes with everything you need to detect low-level sulfur compounds in gas samples. Since some sulfur compounds do not trap well, the Cryo-Sulfur GC uses the Cryo-Cooled Peltier Trap Accessory to enrich the sample, providing lower detection limits.

Like all SRI traps, the Cryo-Cooled Peltier Trap Accessory is plumbed as the loop of a 10-port gas sampling valve. It can cool down to -15^oC for sample enrichment. After enrichment, the Cryo-Cooler is heated (up to 200^oC), and the valve injects the sample into the 60-meter capillary column. Once the sample components are separated by the column, they are detected by the Flame Photometric and Flame Ionization detectors.

The Cryo-Sulfur GC uses a vacuum pump (included) to draw gas samples into the Cryo-Cooler. You can sample ambient air, or use the provided adaptor to connect a Tedlar bag. The vacuum pump interface, which is an electrical outlet on the left-hand side of the GC, allows the vacuum pump to be turned ON/OFF by the PeakSimple data system to provide consistent sampling times.

#SRI-8610-5675-1, CRYO-SULFUR GC (110V)	$19,669.00
#SRI-8610-5675-2, CRYO-SULFUR GC (220V)	$19,669.00
Options & Upgrades: additional detectors with 6 channel USB PeakSimple data system, additional columns, autosampler

Hot Tip

PRECONFIGURED GCs TAKE ADVANTAGE OF BATCH MANUFACTURING, OFFERING A LOT OF GC POWER AT VERY REASONABLE PRICING.