Draw air samples through traps or load
the loop of a gas sampling valve
Enables Data System Control of an
external vacuum pump (included)
Extremely Reproducible Flow through
traps
The vacuum pump
interface consists of a power outlet (110 or 220
VAC ) on the side of the 8610C or 310 GC into
which the external vacuum pump is plugged.
The PeakSimple
data system can turn the power to this
receptacle on/off thus controlling the vacuum
pump. Typically the vacuum pump is used to draw
gaseous samples through the traps for ambient
air monitoring applications, or to load the loop
of a gas sampling valve by pulling sample gas
from a remote location. Because the vacuum pump
can be turned on for a precise length of time,
the gas flow through the traps is very
reproducible (approx. 100ml/min ).
#SRI-8680-0073,
VACUUM PUMP AND PUMP INTERFACE
$619.00
Hot Tip
THE INTERFACE CAN BE USED FOR OTHER ELECTRICAL ACCESSORIES THAT CAN
BE CONTROLLED BY PEAKSIMPLE AS "TIMED EVENTS".
Copyright 2010 QUADREX CORPORATION. All rights reserved