Tel......................................203.393.3112
QUADREX CORPORATION   Toll-Free............................. 800.275.7033
P.O. Box 3881   Fax.................................... 203.393.0391
Woodbridge, CT 06525 U.S.A.   E-Mail................sales@quadrexcorp.com

Contact Us   History   Distributors   Prices   Site Map

 

400-5HT, (5% PHENYL) METHYLPOLYSILOXANE (ON ALUMINUM-CLAD FUSED SILICA)
 
Up
EQUIVALENTS
007-1
400-1HT
007-5
400-5HT
007-5MS
007-10_20
007-1301
007-624
007-35
007-1701
007-17
007-65HT
007-225
007-CW
007-FFAP
007-23
PLT-5A
Aluminum-clad fused silica columns offer the same inert internal fused silica surface, but with an outer layer of aluminum instead of the standard polyimide normally found on GC capillary columns.  Polyimide has an upper temperature limit of approximately 390°C before degradation occurs.  By utilizing an aluminum outer layer, GC columns can extend the operating temperature range upwards to 440-450°C  which is useful for high molecular weight applications.

The 400-5HT phase separates compounds according to boiling point, and is produced on 0.23mm ID aluminum-clad fused silica.  This allows for higher operating temperatures compared to the standard polyimide-clad fused silica columns.  The 400-5HT columns can be programmed up to 420-440°C and are well suited for high molecular weight applications such as crude oils and waxes.

   
Bonded and Crosslinked
Non polar
Excellent thermal stability
Comparable to: SE-52, SE-54, OV-73
Similar phases: HT5
USP Phase Specification: G27
   
400-5HT dimethylpolysiloxane ALUMINUM-CLAD FUSED SILICA columns are available in column I.D.'s and lengths as noted below. 
I.D. 10M. 15M. 25M. 30M.

  STANDARD FILM THICKNESS RANGE
0.23mm 0.1 - 0.25µm
 Inquire with tech@quadrexcorp.com about custom lengths and films.
 

400-5HT OPERATING TEMPERATURE RANGE 
film thickness temperature range
up to 0.25µm -50° C to 440° C
 
400-5HT Bonded Phase Retention Index
benzene 1-nitropropane 2-pentanone pyridine butanol
665.62 751.12 689.59 756.23 662.46

Hot Tip

DUE TO A SLIGHT UNEVENNESS OF THE OUTER ALUMINUM LAYER, THESE COLUMNS ARE BEST INSTALLED WITH GRAPHITE FERRULES.

APPLICATIONS

~CLICK~ BELOW
 View 400-5HT chromatograms on the web:

ASTM D6584 - BIODIESEL STD.
ASTM D6584 - 'GOOD' BIODIESEL
ASTM D6584 - 'BAD' BIODIESEL
IRANIAN CRUDE OIL
 
Back Up Next
Copyright 2009 QUADREX CORPORATION. All rights reserved